|
Re: solenoid and compressor code
ok so I set up the compressor like you had it in your begin vi. I deployed it but two things occurred, the compressor started when i enabled the teleop on the drivers station, but it did not shut off in response to the nason switch.
also i noticed that the arcade driver did not work, is that what will happen until the nason switch shuts off the compressor?, I am guessing that the arcade did not work because the compressor did not shut off?
In your begin vi where is the compressor supposed to react to the pressure switch. I put the pwm from the pressure switch into the slot 1 on the side car as instructed in the example of solenoid and compressor.
so what should i do next ?
thanks john
thanks John
|