Thread: Creating PWM signal for victor
View Single Post
  #10   Spotlight this post!  
Unread 03-03-2010, 10:13
neg0riz0r neg0riz0r is offline
Registered User
no team
  
Join Date: Feb 2010
Location: Taylor
Posts: 11
neg0riz0r is an unknown quantity at this point
Re: Creating PWM signal for victor
OK now I have exactly 16 ms.
I was wrong with my statement concerning the Victor 883 before. I really must have done something wrong while connecting it. Sorry at this point. Because now the 883 runs perfect with the circuit. All directions. Full Speed, Stop..everything is fine.
And it is not important if T = 16ms or 22ms. Both works.

But the Victor 884 still has the same problem. Reverse works to Stop works, but the area above 1.5 ms (which is forward) doesn't work at all. And only in this area the signal becomes unstable, too. Maybe it is a problem with the victor itself. But reverse works, so I just assumed that it is fine...
I will have to get another 884 to check that.