|
Re: Solenoids Wire
Solenoids can be connected to either the solenoid module on the cRio, -OR- to a spike relay...
Per <R49-A> you may connect multiple solenoids to a single spike relay.
I don't see anything specifically disallowing controlling multiple solenoids from a single connection on the cRio solenoid module, however I don't recommend it. That module was designed to support 8 separate output signals, not multiple solenoids per output
hope that helps
__________________
Student:
<04: FRC0213> <05-08: FRC1373>
Mentor:
<09-10: FRC0809> <11-12: FRC3555> <12-14: FRC0073> <15-??: FRC3181>
Volunteer:
<FTAA> <CSA> <Defense Coordinator> <Scorekeeper> <Robot Inspector> <Official Scorer>
2016 Tour:
CTWAT [DefCoord] > Pittsburgh[Mentor/DefCoord] > TVR[FTAA] > FLR[CSA] > NE DCMP[CSA] > CMP[CSA]
|