|
Re: Wire color...
Quote:
Originally Posted by Danny Diaz
Ouch. I happen to fall into this boat; we considered everything that could fall/hang/dangle off/down/from the robot's electrical system (which was mounted upside down as a safety measure against balls and to save space on the robot) - however, I guess we never considered the breakers falling out since we have a hard time pulling them out by hand as it is. But, I guess I can see how this is just another thing we need to consider. Any suggestions on how to guarantee the breakers don't fall out, other than mounting the board right-side up? Has that been a problem with the new Power Distribution Boards?
-Danny
|
In 2005 we mounted all of our electric upsidedown and we had no problem with fuses falling out. We also used ruber bands to help hold in the PWM cables. This year every thing is mounted upsideright and our fuses have almost fallen out many times. We have to keep checking them and pushing them back in.
__________________
If your not dirty than you must be just watching.
Thank's to http://weberelectric.biz/
FRC Team site http://team1322.org/
2004 Great Lakes Xerox Creativity Award, 2008 Web Site Excellence Award, 2010 Kettering District and Western Michigan District Excellence in Engineering award, 2011 Kettering District Gracious Professionalism Award. 2011 Ann Arbor and State Cooperation Awards.2013 Kettering Xeroc Creativity Award.2015 Escanaba Chairman's Award.2015 Kettering Spirit Award.2016 Kettering Chairman's Award
FTC Lightining Boltz 5954, Thunder Botz 7032 http://team1322.org/vex.htm
Last edited by joeweber : 09-03-2010 at 23:19.
|