Thread: Creating PWM signal for victor
View Single Post
  #15   Spotlight this post!  
Unread 11-03-2010, 04:19
semiferger semiferger is offline
Junior Member
no team
  
Join Date: Feb 2010
Location: semiferger
Posts: 4
semiferger is an unknown quantity at this point
Re: Creating PWM signal for victor
The Victor 884 has a deadband with respect to the PWM signal, which is approximately 117 to 137 . Any PWM signal within the deadband results in no output.The PWM deadband accommodates joysticks that do not return to the exact same centre. The PWM deadband effect can be overridden by Robot Controller code if needed.