[eugenebrooks]

We had the Cypress I/O module plugged in to the left side USB port
directly on the classmate and had it go off line when the classmate
lid was closed on the way to a match at SVR. Rebooting solved the
problem after we ran the match with joysticks only.

Our solution was to put two "DO NOT CLOSE LID" signs on the lid
to get us through the rest of SVR. We will likely put mechanical
closure stops on the corners of the keyboard so that this can not
happen again.

We will have to start testing with a tether after every cold boot,
although we have not had a cold boot where the cypress card
did not come up properly.

Eugene