|
Re: pic: 343, up without a doubt
The current lifter used in Florida is a GEM500 with 3 stages and a CIM. The new set up will be a double doozy, and two stages of the GEM500. Things will work on paper, but the true test will be tomorrow. Not quite double, but faster.
The setting of the weight thing with the pneumatics....
The spring loaded clips drive in and attach to the pole. Then the entire lifter mechanism pivots up via a cylender to force the rubber roller into the pole. Then turn on the motors and sit back.
The silver flames are actually a decal like 342 uses. We were thinking paint at one point.
This was one of Ziggy's senior projects, and it has turned out to be a success.
__________________
07'-10' FRC 343
11'-12' FRC 2751
13'-14' FRC 3494
15'-16' FRC 5403
Last edited by Josh Drake : 24-03-2010 at 07:47.
|