|
Re: DS NO ROBOT CODE ERROR
Quote:
Originally Posted by Mentor1818
I am directly connected to the cRIO from the Classmate.
All the DIP switches are in the correct position
I am able to deploy the Digital IO vi and get the 0 to 5V change when changing the Boolean value.
I am working on just trying to get the teleop to work without the DS software in LabVIEW.
|
If directly connected, are you using a crossover cable?
As I understand it, you can read sensors without the DS, but to have actuators active, the DS is required to be running.
__________________
Jon Mittelman
Senior Judge Advisor New England & Israel 2014-2015
Infinite Loop Mentor 2011-2015
TechnoTicks Mentor 2000-2011
Championship Chairman's Award 2009 Team236 TechnoTicks
Judge 2010-2015 Championships
Senior Judge Advisor New England District Championship 2014-2015
Judge Advisor Tel Aviv Regional 2007-2015
Judge Advisor Pine Tree Regional 2013
Maine Regional Planning Committee
New England District Planning Committee
Lead Inspector Microsoft Tel Aviv Regional 2006-2008
Judge & Lead Inspector GM/Technion Tel Aviv Regional 2006
Judge UTC Hartford Regional 2006
|