|
Re: cRIO issues (Imaging and deploying)
Every time I've seen the message that the cRIO can't be found, we've been able to solve the issue with a Safe Mode reformat. The details of this are:
-Power down the cRIO.
- Flip the dipswitch to safe mode.
- Power up the cRIO.
- Run the imaging tool. After it runs for a while, it will ask you if you want to reformat the cRIO. Select yes.
- After the reformat is complete, power down the cRIO.
- Flip the dipswitch out of safe mode.
- Power up the cRIO.
- Run the imaging tool again. It should now image the cRIO like normal.
If this is what you already did, I apologize for the redundancy.
__________________
-
An ounce of perception is worth a pound of obscure.
|