[team3329]

We are using Labview. We are nubes at this so lots of help would be usefull. We are having trouble with our compressor and pnuematics system - for some reason our compressor was working but we ran into trouble. We put our Compressor Open.vi >> Compressor Start.vi in the periodic tasks inthe 100ms loop. It worked for a while until We programed our solenoids in the teleop code (by setting the soleoids with the joystick buttons - we have a duel solenoid valve) and then we got error codes: -44027 and -44046. It says the DIO module has already been allocated but our set up for the compressor is correct. We're really confused!!!! Please somebody help!!

-- thanks --