Quote:
Originally Posted by Alan Anderson
To reset things to the way they were before you shipped your robot, plug your wireless bridge directly into your router, log in to it at address http://10.31.33.1/ with userid admin and password admin, go to the Basic Wireless page, and set the Wireless Security Mode to None. (I'm not absolutely certain that the userid is correct for the newer wireless bridge received by rookie teams. Check your control system documentation to make sure.) |
Rookie teams received the old bridge. However, they received a new router that only runs on 2.4ghz. The bridge would have been configured to run at 5ghz for competition, so rookie teams will need to remove the WPA key and set the bridge back to 2.4ghz.