Quote:
Originally Posted by whatabouteve
can someone please explain to me exactly how they did this. our m1011 has not been working in C++. All we managed to do is plug in the lines for our 206 camera
AxisCamera &camera = AxisCamera::GetInstance();
this gives us a watchdog error after about 6 seconds. the cRio then proceeds to refuse to give signal.
we believed it was a problem with the bandwith or processing since it is a better camera than the 206.
We've tried changing image resolution, compression, frame rate, and we are still getting the same problem no matter what.
could someone please write out exactly what they did to get theirs to work please!!!!
|
Have you gone through and gotten it set up per the getting started document? We just set up the newer camera and it was up and running without an issue.
One thing we DID notice was that for some reason, while we were debugging, we set the brightness to 80 through the labview code. After that point in time, we were completely unable to change that brightness setting BACK, and ended up having to log directly into the camera to set the brightness back to the usual 40. Other than that, it does seem to feed back images to the dashboard just as well as the other one did.