Quote:
Originally Posted by davidthefat
Ok so would you say its better to just solder on the gyro chip to the main board or get a gyro daughter board?
|
If you are referring to the KOP gyro, it is already on a board, you can cut off the male end of a PWM cable and solder the resulting wires to the appropriate pads on the board.
If you have a separate gyro, I have not worked with these before, but I would guess that you probably want some filter circuity like what is provided by the KOP gyro board. A daughter board may provide this circuitry in a convenient package.
Others may be able to help more.