The snowmobiles treads were donated to the team by a from a friend of the team, but were had to buy the
driveshaft and
the treads are off an old snowmobile. In the practice meet that we had we had a little trouble with them because the driver was not use to driving in tank mode. We ended up taking one of the tracks off complete and ended up bending our driveshaft. But we fix that problem with the driveshaft. At the competition we did ok, but then we ended breaking two of our wheel the one with orange and white putting bolts in to it hold them together. We ended breaking our Idler Wheel that is in the middle. I was little worry at first that the treads were going to break, but after our third match I was worry at all. The treads did ok but for going over the and pushing other robots they work good.
Watch at 1:50 (Going over the bump)
http://www.thebluealliance.net/tbatv/match/2010wi_qm62
Watch at 00:50 and 1:33
http://www.thebluealliance.net/tbatv/match/2010wi_qm84