I'll get the ones the above didn't answer
Quote:
Originally Posted by masoug
3) I have installed NetConsole on my computer (with LabView Runtime) and enabled the "NetConsole.out" in "ni-rt.ini" via FTP. I rebooted the robot but it still doesn't work... (auto-connect or not) Has anyone have this problem before?
|
haven't really heard of this happening. Most likely there is some error on the cRIO that is blocking it from sending properly
Quote:
Originally Posted by masoug
4) What is supposed to come up upon booting (of cRIO) on the NetConsole?
|
NetConsole will show a nice long list of StartupLibs being initialized, talking about FRC_NetworkCommunication at the end, as well as other errors it may see (some important, some not), and some other small messages depending on what is in your code (camera errors come to mind. No consequence on the actual robot)
Quote:
Originally Posted by masoug
5) What does updating the cRIO image do? Would it help?
|
If you update the image (even if you are at v20) it will do a complete reformat of the cRIO and wipe everything on it. That's probably a good idea right now since nothing seems to work. Be sure to remove any CAN libraries as they block updates
__________________
"To have no errors would be life without meaning. No strugle, no joy"
"A network is only as strong as it's weakest linksys"