|
Re: Regarding The cRio
Quote:
Originally Posted by Robototes2412
Oh my goodness! I forgot the fact that the cRIO has a serial port that can be used to do this stuff. If you use an absurdly high baud rate (with a heavy dose of custom code, of course) and hook up a crio to, say, an arduino over serial (hook up the tx and rx to digital ports 0 and 1), you could have a co-processor work. I'm going to experiment with this and i will keep you posted.
|
The max for arduino is 9600 baud rate
__________________
Do not say what can or cannot be done, but, instead, say what must be done for the task at hand must be accomplished.
|