|
Re: pic: 4 Inch Wheel Design
Quote:
Originally Posted by Borisdamole
if you plan on hexing them (as you said you were) I would HIGHLY recommend roughing the hex while the wheel is on the CNC....
Having made hex broached wheels quite a few times, we have found if you rough the hex out with a .250 cutter, then use the broach, it is easier on the broach, and who ever is broaching....
For your design, it would also help orient the hex on all the parts....
|
Yeah thanks for the idea. i indexed the broach to one of the spokes
__________________
Marcus W. Byrd
Team 3716
Lead CAD/Design and Fabrication.
|