Quote:
Originally Posted by Bruceb
Anybody used the toolking referbished dewalts?
Thinking of playing with dewalt transmissions this summer.
Also, what kind of carbide tooling do you need to drill these holes if you don't have an edm available?
Bruce
|
We have made these NBD drill assemblies by hand without an EDM in our shop several times. We used lathe with a small carbide boring bar to carefully open up the center of the cluster gear which goes on the CIM shaft. No problem. We used a solid carbide 1/8" drill bit to bore the center of the pinion which goes on the Fisher price. I put a little red Loctite on them when we press them together, just to be sure.