Hi, how are you?
This is the first time I'm configuring the gaming adapter on my own, and I am not sure if I did it correctly. Unfortunately, I cannot test it with the robot and the classmate because I am doing this at my house and have to have it working by the next meeting.
My team and I went to a competition and had the radio settings changed. So, i reset the gaming adapter and followed the instruction provided by first in the "FRC Control System". I managed to navigate to the IP of the bridge and set it up; however, after I changed the IP from the default (192.168.1.250) to the one with my team number (10.3.75.1), I could no longer access the IP address from the web browser. I typed in
http://10.3.75.1 ( which is the IP i set it to) and had an error and could not access the log-in page where I would usually log in as an "admin"
So, I pinged the gaming adapter and got the following:
Quote:
Pinging 10.3.75.1 with 32 bytes of data:
Request timed out.
Reply from 192.168.1.101: Destination host unreachable.
Reply from 192.168.1.101: Destination host unreachable.
Reply from 192.168.1.101: Destination host unreachable.
Ping statistics for 10.3.75.1:
Packets: Sent = 4, Received = 3, Lost = 1 (25% loss).
|
I am no expert, and I don't know if I successfully configured the radio. Did anyone ever have this problem? Or is this not a problem at all and am I good to go?
Another question is.. Do i need to configure the router as well? I wouldn't think so because the router's settings remained unchanged. However, do I?
Thank you!