[davidc10]

I did this so many times last year without a hitch, and now I've got a new installation (Win 7 Pro x64) where the Driver Station doesn't detect the Cypress board. (The board works on other laptops with same OS - although the CyMini service sometimes needs a restart).

The driver looks good - it shows up as FTK3 - configured. The PSoC programmer connects to it fine. The CyMini service is set to auto and running. One thing that is different is that when I installed from the Cypress disk, I ran the updater, so the PSoC Programmer version is 3.12, not 3.10.

Maybe I'm installing in the wrong order this year. Here's what I did:
1. Install LabVIEW original files
2. Install LabVIEW update 2.1
3. Install DSUpdate 1.1
4. Install Cypress disk - everything set to Typical
5. Ran the Cypress Updater

I ran the setups as admin and re-booted after every step. When it didn't work I un-installed all and tried it again.

Is this correct?

David