|
Re: Big Problem: "No Code" displayed on Classmate?
1. What language. Java and C++ act VERY differently from LabVIEW.
2. If LabVIEW, I assume you did a full build and download?
3. I generally use a switch when tethering, so I can connect my laptop and the Driver Station at the same time.
3b. If you set the IP of your laptop to 10.3.75.5, you can install FRC Driver Station (Run the latest version of the DS Update to install it from scratch), and run DS in a window on your computer. This is super helpful when a switch is not available or you lack power to run a switch.
I don't think you missed anything. I would try to format the controller when imaging it, and downloading code again. I don't know if C++ suffers from this issue, but LabVIEW has a nasty tendency to crash the robot when the user code is too big.
__________________
Kettering University - Computer Engineering
Kettering Motorsports
Williams International - Commercial Engines - Controls and Accessories
FRC 33 - The Killer Bees - 2009-2012 Student, 2013-2014 Advisor
VEX IQ 3333 - The Bumble Bees - 2014+ Mentor
"Sometimes, the elegant implementation is a function. Not a method. Not a class. Not a framework. Just a function." ~ John Carmack
|