Thread: [OCCRA]: Partner controller not linking up
View Single Post
  #2   Spotlight this post!  
Unread 28-10-2010, 14:48
whatabouteve whatabouteve is offline
Registered User
AKA: Dean Keithly
FRC #0245 (Adambots)
Team Role: Leadership
  
Join Date: Jan 2009
Rookie Year: 2007
Location: Rochester Hills,MI
Posts: 45
whatabouteve is an unknown quantity at this point
Re: [OCCRA]: Partner controller not linking up
1) the batteries are not dead. We have replacedthem several times and it does not look like that kind of a problem.


We may have configured the controller by plugging it into the cortex but if that were true, then it would never link up. This is an intermitent problem. 90% of the time, after turning on the controllers they fail to link to each other but the other 10% of the time, they will linkup no problem and have the proper lightcolors.

WE ARE USING DEFAULT CODE!!!!

Therefore, no firmware should be needed on either controller.
If we do have the partner linked to the cortex, then we need to know how to undo that.
Last edited by whatabouteve : 28-10-2010 at 14:51.
Reply With Quote