|
Re: Chainless drive system?
Just FYI: you're going from a 'dead axle' (where the wheel axle doesn't spin) to a 'live axle' drive system.
An OTS mounted bearing might work well for a prototype, check out McMaster PN 5913K61 as an example. You could also machine your own bearing brackets. I would look at machining U-channel to mount the transmission to one leg, a bearing in the other leg, and machine out the webbing to let the wheel pass through. Good luck!
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.
Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.
|