Quote:
Originally Posted by compwiztobe
You can also specify another IP on your network as a remote dashboard, and the dashboard data will be forwarded to that IP, which should be able to run any old dashboard like normal. I believe the remote dashboard setting is on the 2rd or 3rd tab of the lower-half controls on the classmate.
|
Aren,
The camera images are not forwarded through when using the remote dashboard, see the thread linked above for discussion.
Either the software posted above or a similar tool posted
here with a USB NIC is the easy way to see the camera image in both places.
If you don't need the camera feed for the robot or driver's station you may be able to accomplish what you want by placing a Network Switch on the robot between the cRIO and gaming adapter and hooking the camera up to that.
You would have to change the camera settings to an unused IP on the 10.11.78 range. Then you should be able to view the camera image by connecting to it with a browser from any machine on the 10.11.78 subnet.
NOTE: I haven't actually done this, but I see no reason it shouldn't work.