[qnetjoe]

Hi Joe,

here is a quick troubleshooting list that you should do:

1. Run through the Cleaning instructions for your cRIO and install the gaskets if you have not already. Here is a link to the directions on how to do so
   
   http://digital.ni.com/public.nsf/all...257673007935A1
   
   
2. Double Check Power connections, Make sure to pay attention to the PD Board to see if any of its LED flicker.
   
   
3. If that fails you might consider calling the NI Customer Service to start the RMA process at 866.275.6964

You might consider posting over at ni.com/first as we monitor that much more closely than CD.

Please keep us posted on how things turn out