Quote:
Originally Posted by slynch
Hi All,
Gates will be honoring pre-season 2011 FRC orders up through December 15, 2010.
If you are stumped as to what parts to order, keep in mind Gates supplied 5mm PowerGrip GT2 belts and sprockets for the 2010 FRC. These components should work very well for the FRC 'bots, but the sprockets are made out of steel. If you want to use aluminum sprockets, (with lower load ratings than GT2) you should use 5mm PowerGrip HTD belts and sprockets. You can download drive design manuals at www.gates.com/drivedesign to determine part #s.
Fill out the attached form with your desired part #'s, and then email to ptpasupport@gates.com.
-Shannon
slynch@gates.com |
I ordered the 5mm HTD belts and aluminum sprockets. I was expecting to get sprockets that had the rims on them as the picture in the catalog showed. Instead, I received ones with no rims. I went through the catalog again to make sure I ordered the proper part number and did not see any mention of rim vs. rimless options. Did anyone else have a similar experience?
If you were able to get the ones with rims, please let me know how you did it.