Quote:
Originally Posted by steelerborn
Yeah, all of the axles are 1/2" with cantilevered wheels 3/8" would be really bad. 
As far as the diamond shape it was mainly for looks, team 114 used a simpler square sliding block, we may need to change this when we begin manufacturing, but we will definitely look into that.
Thanks |
If it has no function, it shouldn't be there.
I'm with eugene, make them square.
I'd also say lose the pocketing on the crossmember and switch them to 1/16" wall. I can see why with teh slots you can't run 1/16" on the siderails, but I'd recommended losing the pocketing there as well. There is a lot of work invested in such pocketing, and without much gain.
Heavily pocketed 1/8" is actually weaker than solid 1/16", and often a bit heavier.