View Single Post
  #6   Spotlight this post!  
Unread 16-10-2002, 22:50
rbayer's Avatar Unsung FIRST Hero
rbayer rbayer is offline
Blood, Sweat, and Code
no team (Teamless Orphan)
 
Join Date: Mar 2002
Rookie Year: 2001
Location: Minnetonka, MN
Posts: 1,087
rbayer is a glorious beacon of lightrbayer is a glorious beacon of lightrbayer is a glorious beacon of lightrbayer is a glorious beacon of lightrbayer is a glorious beacon of light
Send a message via AIM to rbayer
Quote:
Originally posted by Mike522


has anyone tried charging a battery with 2 charges at the same time! just wanted to know!!!!

No, and I'm not sure if it would be a good idea if both chargers are of the "float" type FIRST gives us. I'm no electrical engineer, but I think things could get very strange, very fast, and while batteries won't start exploding, it may actually take longer to charge if the chargers are flipping back-and-forth from float mode as they may read the other charger's current as a full battery.

On another note, make sure you have chargers other than the pieces of junk they gave us last year. Given the 17.2Ah batteries we use, those chargers take about 17.2 hours to fully charge a battery as they are just 1amp (or maybe they were 2amp @ 8.5 hours?). The old, heatsink-equipped chargers were 4amp, meaning a full-charge time of just over 4 hours. These numbers are a bit over-simplified as its not quite a direct relationship, but its close enough to get the idea.
__________________
New C-based RoboEmu2 (code simulator) available at: http://www.robbayer.com/software.php