|
Re: Jaguar current sensing technical details?
Kevin,
The reason for the non linearity is the device's inability to drive the output to zero volts. The specification is for a minimum of 3 mV typical but can be as high as 50 mV. The TI datasheet on page 4 has a very descriptive curve showing the errors. In applications where minimum errors are needed, designers would usually add a biplolar power supply to allow driving to zero volts.
http://pdf.chinaicmart.com/3AI/INA193AIDBVR.pdf
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|