|
Re: Peg height question?
Did this quickly so please check the numbers, but it looks pretty straight forward - the ends of the poles go all the way to the bottom of the tubing at the bottom.
From the field documents (ignoring the thickness of the sheet metal plate at the bottom, Floor to the center of the pegs:
Outer poles
Bottom peg 29.21 + .83 (half diameter) = 30.04
Center peg 58+8.17+.83 = 67
Top peg 58 + 45.17+.83 = 104
Middle pole
37.21 + .83 = 38.04
58 + 16.08 + .83 = 74.91
58 + 53.08 + .83 = 111.91
I used half of the 1.66 from the detail views, even though some of the BOM's say 1-1/2 pipe not 1-1/4
__________________
Close enough to taste it, too far to reach it
|