Quote:
Originally Posted by Navid Shafa
A) Are you planning on running the chain on the inside of the frame?
B) Are the bumpers going to be mounted right onto the standoff blocks, without any other support?
|
Yes and Yes.
The spacing between the edge of one stand off and the edge of the next closest stand off is always less then 8". Which is to say that the center points on the standoffs may be a bit more then 8, but if I am reading the rules correct "and no section of BUMPER greater than 8” may be unsupported)" just having material behind it suffices. And with a bolt holding it in place, and a generous amount of stand off to support the bumper from twisting, they should be good.