|
Re: Minibot climb rate
Quote:
Originally Posted by Travis Hoffman
Travis is surely not the only one with an FTC mini kit handy, as at least 800+ other teams have ordered these.
Did you know that the gears were "Assembled in USA"? Probably the reason behind the cost.... Go go gadget globalization.
Mr. Ruler sez that the 120 tooth gear's PD is 3.75", and its thickness is 0.25"-ish.
Mr. Scale sez that the 120 tooth gear weighs 114.71 g / 0.25 lb. (in its thin plastic packaging - didn't want to mess up the shiny finish).
Mr. Scale also sez that the 4" wheel weighs 117.24 g / 0.26 lb.
|
Did you get a weight on the 80 tooth gear? Or would I be close enough by extrapolating it from the 120 tooth?
By extrapolation I'm guessing the 80 tooth gear is 76.47 g.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
Last edited by billbo911 : 12-01-2011 at 15:00.
|