View Single Post
  #3   Spotlight this post!  
Unread 01-13-2012, 06:20 PM
nighterfighter nighterfighter is offline
Former 1771 Mentor
AKA: Matt B
no team (None)
Team Role: Mentor
 
Join Date: Sep 2009
Rookie Year: 2007
Location: Littleton, CO
Posts: 838
nighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant future
Re: Bridge resetting

2 Things it might be...

One: Ensure that all the connections are secure. (Power, ethernet (to bridge and cRIO)

Two: This is more likely... How are you powering the bridge? Make sure you ae using the dedicated 12V power supply (there is only ONE!) and going through the supplied power convertor. Do NOT use one of the 20 12V power blocks, those are for your motors.

In addition- make sure your cRIO is connected with the 24V connector also...

And if you connect directly tethered to the cRIO (NOT using the bridge), does the same problem occur?