|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Picture of the Goal
Here's a picture of the new goal. If you are going to modify your own, use 1/4" clear vinyl tubing (from Home Depot for $.99 per 10' roll) We removed the outer PVC bottom segments since they served no function with the new design but made drilling too difficult) Also note: we haven't threaded the top layer of tubing yet- it will be 24" high for the tournament. The balls do not come out on their own but (as in the regular season) can be easily pushed through or pulled out. The loose ends are being held together with tie wraps.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Uniform rules and enforcers? | Ben Mitchell | General Forum | 31 | 12-01-2005 20:55 |
| Dilemma - Letter of the rules v. spirit of the rules | Natchez | General Forum | 27 | 03-04-2003 15:37 |
| OCCRA Women's Tournament 2002 | Kevin Smith | OCCRA | 0 | 07-12-2002 16:06 |
| Time for new rules! | archiver | 2001 | 11 | 24-06-2002 02:01 |
| Women's Competitive Robotics Tournament | Mike McIntyre | OCCRA | 2 | 19-11-2001 00:51 |