Go to Post There's "FIRST the organization" and then there's "FIRST the vision for the future through a set of ideals". I've grown somewhat skeptical of the former in recent years, but, after 10 years, I'd still throw myself in front of a bus for the latter. - Rich Kressly [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
View Poll Results: How much does your team's robot weigh?
More than 135 pounds 11 11.22%
Between 130 and 135 pounds 11 11.22%
Exactly 130 pounds 7 7.14%
Between 125 and 130 pounds 18 18.37%
Between 100 and 125 pounds 23 23.47%
Between 75 and 100 pounds 10 10.20%
Less than 75 pounds 3 3.06%
There's a weight limit in the rules? 1 1.02%
We're too busy building a robot to worry about weight! 9 9.18%
We have an anti-gravity module... 5 5.10%
Voters: 98. You may not vote on this poll

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #18   Spotlight this post!  
Unread 14-02-2003, 10:02
D.J. Fluck
 
Posts: n/a
Quote:
Originally posted by badjokeguy
I doubt your gear weighs 22 pounds, we used a hundred tooth geasr last year and it only weighed 3 pounds


Bad
The Gear doesn't weigh 22 pounds, the 2 drill motors and the gear do Plus its made of steel...
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How much planning goes into your robot? Jnadke General Forum 41 29-01-2006 21:29
serious problem found - robot controller resets when jarred! KenWittlief Electrical 23 19-03-2003 13:30
WASH Palm scouting at the Championship Mike Soukup Scouting 2 19-04-2002 15:14
Index of team's post about their robot... Ken Leung Robot Showcase 1 20-03-2002 17:10
about how Drive Train push the robot... shouldn't the force accelerate the robot? Ken Leung Technical Discussion 12 26-11-2001 09:39


All times are GMT -5. The time now is 10:19.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi