|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
||||||
|
||||||
|
Jideco Data
This is what I have learned from Jideco.
The motor was used on a Legacy (Honda? Subaru? I don't know). The motor is out of production now. It should still be available from Service Parts. It has an internal circuit breaker which will break at 15A in 6-8 seconds. There are 2 performance data given At 14.5V: Free Speed: 91 RPM (min) Free Current: 3 Amps (max) Stall Torque: 9.6N-m +1.8N-m / -1.2N-m Stall Current: 24 Amps (max) At 13.5V: Free Speed: 85 RPM (min) Free Current: 3 Amps (max) Stall Torque: 8.3N-m +1.5N-m / -1.0N-m Stall Current: 21 Amps (max) Joe J. P.S. Using my handy dandy FIRST Motor Calc spreadsheet, I have quickly calculated that at 12V, the peak power of these motors is just over 14W -- not too high but it could be useful for a lot of slow speed applications (opening doors, locking hooks, etc.). |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wanted! Dew Reward for Finder! | JVN | General Forum | 11 | 16-04-2003 13:41 |
| drive team.....just wanted to post something. | archiver | 2000 | 3 | 23-06-2002 23:11 |
| Wanted: Experienced FIRST Teacher in Florida! | Mike S | General Forum | 1 | 30-04-2002 15:08 |
| Is there a size regulation for the pit area if we wanted to put up a banner | Ragin_Kage | General Forum | 6 | 14-03-2002 15:33 |
| Jideco motors wanted for trade | RobZeuge | Technical Discussion | 6 | 20-02-2002 16:44 |