|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
|
||||
|
||||
|
We used a very simple design. We are using 4 solid state 12V DC relays for our four drive motors. We connect the power to the relays to the output from the fuse panel to the Victors controlling the motors. When the Victors lose power the relay trips a digital input. We have four LED's on the operator interface to show when the motors are tripped. The base driver also has special glasses with LED's in the side to show them the same thing. That way the driver knows when to let off and the arm driver can hit em if he doesn't slow down. Redundency is good.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2004 Championship Eligibility Criteria!!! | dez250 | General Forum | 214 | 28-12-2003 20:11 |
| Championship Qualification - How you would've done it | Ken Leung | Championship Event | 6 | 26-10-2003 14:00 |
| Wow! what a year | archiver | 2000 | 8 | 23-06-2002 22:43 |
| custom circuit boards | ctartist236 | Technical Discussion | 5 | 08-01-2002 00:10 |
| Making heads or tails of the new announcement... | Jessica Boucher | General Forum | 66 | 26-09-2001 11:13 |