|
|
|
![]() |
|
|||||||
|
||||||||
| View Poll Results: How much planning goes into your robot? | |||
| Drafting - None or very little pre-assembly planning - Hey, We're Optimistic. |
|
27 | 12.39% |
| Drafting - Moderate - Only essential systems are drawn up. |
|
94 | 43.12% |
| Drafting - Extreme - You could drive the robot before it's been built! |
|
73 | 33.49% |
| Calculations - None or very little - We live on the edge. |
|
18 | 8.26% |
| Calculations - Moderate - Yeah, we did a few to get some things right. |
|
107 | 49.08% |
| Calculations - Extreme - Is that an African or European Swallow? |
|
59 | 27.06% |
| Robot!?!? You mean we're supposed to be building a robot!? |
|
30 | 13.76% |
| Multiple Choice Poll. Voters: 218. You may not vote on this poll | |||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#20
|
|||
|
|||
|
Re: How much planning goes into your robot?
We make solid models and detailed drawings of every part on the robot, including kit parts. This makes our assembly actually assemble without having to widen holes, remake parts when interferences are discovered.
In 2003, the came in very useful when the drive key ways in our primary drive shaft started to fail. We got some material, printed out the drawings and submitted them to the shop. We had replacement parts ready before the key ways actually failed. This past year, one of our high school students learned enough to be able to make our engineering drawings based on the models which we uploaded on our message board. He prepared a design notebook with every part on the robot, material, how much it cost, etc. It was an impressive piece of work, and he really knew how to make engineering drawings by the end. Since we have something like 400 different parts on our robots, that's a lot of drawings. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| serious problem found - robot controller resets when jarred! | KenWittlief | Electrical | 23 | 19-03-2003 13:30 |
| Image Discuss: 810 - Minotaur: Coming to a regional near you. | CD47-Bot | Robot Showcase | 47 | 25-02-2003 16:19 |
| WASH Palm scouting at the Championship | Mike Soukup | Scouting | 2 | 19-04-2002 15:14 |
| Index of team's post about their robot... | Ken Leung | Robot Showcase | 1 | 20-03-2002 17:10 |
| about how Drive Train push the robot... shouldn't the force accelerate the robot? | Ken Leung | Technical Discussion | 12 | 26-11-2001 09:39 |