Go to Post Please share your opinion and post whatever you want, I wouldn’t mind. Because I may be wrong. - Arefin Bari [more]
Home
Go Back   Chief Delphi > FIRST > General Forum
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
View Poll Results: How much planning goes into your robot?
Drafting - None or very little pre-assembly planning - Hey, We're Optimistic. 27 12.39%
Drafting - Moderate - Only essential systems are drawn up. 94 43.12%
Drafting - Extreme - You could drive the robot before it's been built! 73 33.49%
Calculations - None or very little - We live on the edge. 18 8.26%
Calculations - Moderate - Yeah, we did a few to get some things right. 107 49.08%
Calculations - Extreme - Is that an African or European Swallow? 59 27.06%
Robot!?!? You mean we're supposed to be building a robot!? 30 13.76%
Multiple Choice Poll. Voters: 218. You may not vote on this poll

 
 
Thread Tools Rating: Thread Rating: 4 votes, 5.00 average. Display Modes
Prev Previous Post   Next Post Next
  #25   Spotlight this post!  
Unread 29-01-2006, 21:20
kmcclary's Avatar
kmcclary kmcclary is offline
Founder 830/1015;Mentor 66/470/1502
FRC #0470 (Alpha Omega Robotics)
Team Role: Engineer
 
Join Date: Aug 2001
Rookie Year: 1994
Location: Ann Arbor, MI
Posts: 491
kmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond reputekmcclary has a reputation beyond repute
Re: How much planning goes into your robot?

Well... It all depends on which team I've worked with that we're talking about.

Some of my old teams have sponsors that have their own methods,
that range from a mix of student/sponsor design to students
stating WHAT they want the robot to do, and the sponsors then
fully design a machine for them to manufacture. I'll let them
speak for themselves.

Now as for "my teams" (the few I'm working with the most), I've
provided a "Formal Game Analysis" method to help the *students*
mathematically figure out what designs will work, and what probably
won't. It looks at a game and *suggests* a range of *possible*
tactics and bot designs. (BTW, what it suggested for THIS year
blew even ME away!). I could talk about that method, but that's
a whole separate thread, and not relevant at this point of the season.

Anyway, one way or another we're left with a set of PRIORITIZED GOALS
for the machine, AND the overall machine's concept.

Next, **THE BIG RULE: "Machine Goals will be accomplished in PRIORITY
ORDER". Resources ($$, people, matl's, weight allowance, etc.) shall
be shunted from lower goals to achieve higher, as needed."** No
sense building something that won't accomplish your #1 goal!

Ex: A few years ago, we had: #1 as "Grab Small Balls", and #4 as
"Handle Big Ball".Well, during design the Big Ball Arm got in the
way of the small ball collector, so it was dropped!

We next make the goals CONCRETE, and PRIORITIZE them.
Ex: We don't say "It'll score a lot". Instead, concrete actions,
speeds, and times within the round are all defined. For example:
"In Auto Mode, the machine shall take no longer than <xx> seconds
to <move to this position> <do THAT> (or whatever)."
That's pretty specific! Of course with a 10 sec auto mode
this THEN suggests that "In Auto Mode, the PAYLOAD must
require no longer than (10-xx) sec to <do ITS specific thing>", etc.
We then do this for ALL actions, at ALL points throughout the game.

This yields a VERY specific set of performance specs for the machine,
but does NOT say HOW they should be accomplished.


At this point, my teams diverge again...


Some of my old teams then use "Centralized Design". The entire thing
is worked out in ALL detail. CAD drawings are made, etc. The build
now progresses like a manufacturing plant. Yea, this works well for
some teams, and their sponsor's philosophy. The design is well controlled,
Production management tools can be employed, etc.

But if you have TOO much of that, I've found it hard to get anyone to show
up to BUILD it! If for any reason they haven't felt a part of the decision
process (which often happens if you decide AGAINST their "favorite design")
they may even *abandon* the project because now they are ONLY
"labor for someone else's machine". (Hmmm...)


My current team uses a DIFFERENT philosophy. We let the SUBGROUPS
make ALL the manufacturing decisions for THEIR part of the problem,
DURING the build. After all, they are the ones that have to make it
work, they already have a very specific set of design goals in hand
it MUST accomplish, and a manufacturing timetable to meet.

So let's say for example Drivetrain decides to choose a walker bot
over a tank. Our rule: If it can meet ALL of the design specs we
laid out (including time, weight and size allocated to it) AND it can
be made to work in time, GO FOR IT!

This isn't without its own challenges... We often have some verrrrry
nervous mentors! But we HAVE "local" mentors in each subgroup to
keep an eye on it. You also don't KNOW exactly what you'll end up
with when they start!

But the advantages are many:

1) We get to building sooner. Once the spec is in place, they GO.
2) It challenges the students. All of the problems have NOT been worked
out when they begin. They have to THINK, and there are many
opportunities to teach them about how to solve something.
3) It encourages "creative problem solving" on the fly. Some VERY cool
stuff has come out of groups to cure certain problems encountered.
4) The design isn't "fixed in stone". If one thing won't work, the local
subgroup has the AUTHORITY to change things, whenever needed.
For example: If Drivetrain's "super delux 27 wheel drive" they're
attempting is overweight, won't work, or parts aren't available for it,
AND a basic two wheel two castor drive WILL, Drivetrain group is
FREE to change it in the MIDDLE of the build, as long as it won't
affect the STRATEGY of the bot.
5) We're free to EXPERIMENT. A subgroup that's ahead of schedule
may decide to try another thing, to see if that will work BETTER.
(...and if it DOES work better, use THAT instead!)

But really, HALF the fun of this method is we DON'T know what the bot
it'll LOOK like, until we're done. Yes, we know what it will DO, and
when it'll be READY, but the final form is VERY mutable during the build.
Also, we all often drop and run over to look when someone comes up with
something REALLY cool, which means you don't want to miss ANY build sessions!

But the best part is that when you're done, EVERYONE feels ownership.
You each know that YOUR decisions made during the build contributed
to <this> or <that> ability of the final robot.

Now don't get me wrong... I'm not knocking Super-CAD/CAE driven teams
at all! Testing a design on a CAE system REALLY helps! And if you
have way too large of a student/mentor ratio, having a huge work
plan predefined helps. People can just come back when they need
more work, and grab "Task #27" off the queue. VERY efficient.

But if you don't have a lot of CAD/CAE expertise on hand, giving
everyone the freedom to make LOCAL decisions DURING manufacturing
DOES work, and may even get you off the starting block a bit sooner.

Now IMO, the KEYS for ANY build method are having:
- WELL DEFINED GOALS for the robot to accomplish;
- A good work schedule defined up front that they MUST meet;
- Make sure everyone has the RESOURCES to accomplish (training,
matl, money, mentors, etc.);
- Someone in EACH group responsible for keeping an eye on the
schedule (no getting caught in trivia, we have a schedule to meet!);
- Having the GUTS to drop one line of research for another, if needed;
- GOOD COMMUNICATIONS, so everyone knows the status - between
all subgroups, students/mentors, teams and sponsor's locations,
team and school, etc.

Does that answer your question?

I hope this helps!

- Keith
__________________
Keith McClary - Organizer/Mentor/Sponsor - Ann Arbor MI area FIRST teams
ACTI - Automation Computer Technologies, Inc. (Sponsoring FIRST teams since 2001!)
MI Robot Club (Trainer) / GO-Tech Maker's Club / RepRap-Michigan) / SEMI CNC Club
"Certifiably Insane": Started FIVE FRC teams & many robot clubs (so far)!
2002: 830 "Rat Pack" | 2003-5;14: 1015;1076 "Pi Hi Samurai" | 2005-6: 1549 "Washtenuts"/"Fire Traxx"
2005-(on): 1502 "Technical Difficulties" | 2006-(on): FIRST Volunteer!
2009-(on): 470 "Alpha Omega" | WAFL | Sponsor & "Floating Engineer" for MI Dist 13 (Washtenaw Cnty)
2011: 3638 "Tigertrons" | 2013-(on): 4395 "ViBots" | 2014-(on) 66 "Grizzlies"
"Home" Teams: 66, 470, 1076, 1502, 4395
Local FIRST alumni at or coming to Ann Arbor (UM/EMU/WCC/Cleary)?
...We Want YOU as a Mentor! Please email me for info!
Support CDF Reputation - If a posting helped, thank 'em with rep points!
"It must be FRC build season when your spouse and children become 'Action Items 8 & 9'..."
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
serious problem found - robot controller resets when jarred! KenWittlief Electrical 23 19-03-2003 13:30
Image Discuss: 810 - Minotaur: Coming to a regional near you. CD47-Bot Robot Showcase 47 25-02-2003 16:19
WASH Palm scouting at the Championship Mike Soukup Scouting 2 19-04-2002 15:14
Index of team's post about their robot... Ken Leung Robot Showcase 1 20-03-2002 17:10
about how Drive Train push the robot... shouldn't the force accelerate the robot? Ken Leung Technical Discussion 12 26-11-2001 09:39


All times are GMT -5. The time now is 01:29.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi