|
Re: wheelchair wheel + F.P. motor ??
Posted by Dan.
Student on team #10, BSM, from Benilde-St. Margaret's and Banner Engineering.
Posted on 1/21/2000 12:52 PM MST
In Reply to: wheelchair wheel + F.P. motor ?? posted by Justin Stiltner on 1/21/2000 12:43 PM MST:
I really hope you're not using those as your sole source for motive power. Last year we did and we were slow (which is really not a good idea this year), we grinded the gears (until we replaced them with metal ones), and even then we burned out a motor per match (the magic smoke has to stay IN for those things to work.)
Anyways, to engage those things with the wheels we put a disc of lexan over one side of the wheel and then had hex heads protruding that would engage with that big, black plastic disc that came with the FP motors. There were no problems with this system; I wish I could say the same for the motors though.
They're great motors, we just used them for the wrong purposes.
G'Luck, :-Dan
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|