|
Re: The drills are not FP or Delphi Power Sliding Door Motors...
Posted by Matt Leese.
Student on team #7 from Parkville High School and NASA, Black & Decker, AAI, Raytheon.
Posted on 7/2/2000 2:34 PM MST
In Reply to: Re: The drills are not FP or Delphi Power Sliding Door Motors... posted by Justin Stiltner on 7/1/2000 7:36 PM MST:
Well, obviously using all four drill motors would in no way be required. You could use none for all anyone would care. You'd have to engineer with trade-offs (isn't that more like the real world then?).
Adding a second fuse isn't going to do anything at all -- you have to use a higher amp fuse. They'd need to raise the weight limit if we were to use two batteries (they're at least 1/10th of the robot weight right now and there's no way you're packing a second one on). It'd also be much more of a pain to wire.
Matt Leese
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|