|
Re: There is an art about balancing
Posted by Matt Berube at 1/8/2001 7:16 AM EST
Engineer on team #49, Delphi Knights, from Buena Vista High School and Delphi Automotive.
In Reply to: There is an art about balancing
Posted by Ken Leung on 1/8/2001 1:03 AM EST:
: So, crossing my fingers and let go of the ramp probably isn't the best method to do a perfect job.
I agree with you, but without any feedback as to the balance state of the ramp, (assuming you are not going to try to use the gyro chip), you will have to rely on whether the ramp "looks balanced". You will have to use this method whether the robot is on the ramp or not. The only advantage to having the robot on the ramp is the ease of moving the CG back and forth.
Matt B.
T49
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|