|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
missing kit parts
We are missing both double cyliinoids, optical sensors, quarter-inch air tubing, and all the quarter inch air tubing connectors.
Is anyone else missing these parts, or is it just us? |
|
#2
|
||||
|
||||
|
We're missing them, as well. Along with a few other things.
"Solenoids" are what you're referring to. Honest mistake. I don't mean to sound like a jackass. |
|
#3
|
|||
|
|||
|
I thought the optical sensors came with the EDU robotics kit. I can't remember seeing them there but I have to go to the lab to check, which won't happen til tomorrow.
We're missing a hole bunch of pneumatic stuff, all the SMC stuff. I thought that I heard that SMC pulled out and there would be an alternative supplier. Andrew Team 356 |
|
#4
|
||||
|
||||
|
Quote:
![]() |
|
#5
|
|||||
|
|||||
|
Whew... so we aren't the only ones with LOTS of stuff missing.
By the way, did anyone get EXTRA stuff in the kits? |
|
#6
|
|||||
|
|||||
|
we are missing our whole pnumatics bag
![]() |
|
#7
|
||||
|
||||
|
so are we, and our sensors...and our catalogs, no big book. whats with this?
|
|
#8
|
||||
|
||||
|
Router Fence
At the Novi Kickoff, My team got what appears to be a router table fence in a long cardboard box. I seriously doubt that this is what we should have gotten. We do not appear to have the 2" x 4" x 36" aluminum extrusions and some of the shafts listed in the kit BOM. Did anyone else in Novi get this same thing?
![]() |
|
#9
|
|||
|
|||
|
Yes- we are missing the same items too. We are rookies and glad to see that others are missing their parts too. Do we wait until Tues when we hear from FIRST?
|
|
#10
|
||||
|
||||
|
Quote:
These boxes were not handed out at the San Jose Kickoff, and were shipped to teams. Quote:
Patience is key, but I have to admit that I was very worried about all of our missing 40 Amp self-resetting breakers, until I got a reply and clarification from Dave Lavery, himself. Last edited by FotoPlasma : 05-01-2003 at 17:24. |
|
#11
|
||||
|
||||
|
We are missing the same pneumatic stuff as everyone else, plus:
- Yaw rate sensor connector - all software, including DVD of animations - operator interface - joystick controller -operator radio modem - connectors - 25 pin plus shield - retroreflective tape - 120 psi relief valve Anyone else missing this? |
|
#12
|
|||
|
|||
|
Quote:
|
|
#13
|
|||||
|
|||||
|
wow.....seems 1077 is having the same problem as a lot of other people are we are missing the pneumatics stuff and a lot of other things!
Last edited by BBFIRSTCHICK : 05-01-2003 at 18:53. |
|
#14
|
||||
|
||||
|
We are missing a lot of parts too, including optical sensors and tubing for pneumatics, and other stuff that I can't remember right now. I wonder if all teams who attended the kick-off in Toronto are missing them, or if there was another box that we did not pick up. To all teams that have all the parts: how many boxes do you have?
We don't have an OI and joysticks either. Does this mean we have to use the ones from the EDURobotics kit? To those who saw the EDURobotics competition in Toronto: WE are the team that dumped balls into their own goal I know this was stupid, but then we are a rookie team And they could have gone over the rules in more detail. At least I was not driving ![]() |
|
#15
|
|||||
|
|||||
|
Your EDU robot should have came with a slip of paper stating that the operator interface was to be used for the main robot.
There should have been 2 plastic crates, 1 cardboard box, and your manual from the kickoff. The optical sensors are shipped with the Big Boog from MSC, and the software Visual Studio, and file maker pro |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rules on making spare parts fyi | DougHogg | General Forum | 0 | 02-04-2003 16:18 |
| Q&A Discuss: Size of the kit of parts | CD47-Bot | Extra Discussion | 4 | 26-12-2002 03:26 |
| My Digital 'Kit of Parts' For My Friends | archiver | 2000 | 7 | 23-06-2002 22:33 |
| Inventor drawings of parts from kit | patrickrd | Inventor | 1 | 11-01-2002 14:16 |
| Inventor and Virtual Kit of Parts | Torchin | Inventor | 1 | 09-01-2002 09:59 |