|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#6
|
|||||
|
|||||
|
The 2002 Chiaphua output shaft have 9 teeth. The cluster gear has 44 teeth on the input side, and 16 on the output side. The motor output shaft and input side of the cluster are some strange pitch size that I don't remember (I have the motor in front of me, but don't have my tooth guages with me). The output side of the cluster is 32 pitch, 1/2" face width.
Hope that helps. -dave ------------------------ Y + AX^2 + B.... ehhh, whatever. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| gearing for last year's gear cluster for the chipuhua motor | Antonio | Motors | 0 | 07-01-2003 15:31 |
| Thunder Chicken CCT | Simon G | Motors | 4 | 03-01-2003 13:18 |
| Chiaphua Motor Pinion Gear | Joe P | Inventor | 0 | 27-02-2002 15:48 |
| drilling that chiaphua gear | ahecht | Motors | 8 | 06-02-2002 01:23 |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 29-01-2002 12:32 |