|
Re: Possible Configuration to keep things cheap
Posted by Mike King, Other on team #88, TJē, from Bridgewater Raynham and Johnson & Johnson Professional.
Posted on 5/23/99 3:35 PM MST
In Reply to: Possible Configuration to keep things cheap posted by Thomas A. Frank on 5/23/99 11:11 AM MST:
: In one off quantities, this would be about a $400-600 setup depending on processor. In
: production quantities, it would be cheaper.
: That's probably less than the controllers cost now.
: Tom Frank
Not that this an indicator, but I remember putting a 500 dollar deposit on the RNET's to 'borrow' them.
So I'm betting that your right, and it is cheaper.
Mike
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|