|
Re: control system
Posted by Nate Smith.
Other on team #66, GM Powertrain/Willow Run HS, from Eastern Michigan University and GM Powertrain.
Posted on 2/26/2000 6:03 PM MST
In Reply to: control system posted by Andrew Rudolph on 2/25/2000 3:35 PM MST:
We've got a rather creative use of the relays on the robot side...and a 4-pole switch on the operator side that is linked to the relays on the robot side...I'll have to get a pic at Great Lakes..
Nate
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|