Go to Post However, I think the laws of physics indicate that doing so is going to be very difficult at best. - EricH [more]
Home
Go Back   Chief Delphi > Old Forum Archives > 2000
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Spotlight this post!  
Unread 23-06-2002, 22:28
archiver archiver is offline
Forum Archival System
#0047 (ChiefDelphi)
 
Join Date: May 2001
Location: Pontiac, MI
Posts: 21,214
archiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond repute
Re: RoboStars 'Mini-Arm' Control Device

Posted by Chris.   [PICTURE: SAME | NEW | HELP]


Coach on team #308, Walled Lake Monster, from Walled Lake Schools and TRW Automotive Electronics.

Posted on 3/21/2000 6:02 AM MST


In Reply to: RoboStars 'Mini-Arm' Control Device posted by Steve Kalemkiewicz on 3/20/2000 6:03 PM MST:



: I was wondering if anyone had a picture of RoboStars' (#308) 'Mini-Arm' Control Device. I'm curious how the mini-arm stays in position after the controler lets go of it. Any other info that could be provided would be helpful.

: Thanks

: -S Kalemkiewicz

I don't have any pictures yet. There was a picture of us in the Detroit Free Press on Monday, March 13 and you can see the 'Mini-Arm' controller. I'll try to scan the picture and post it.

It stays in position by building some static friction into the system. We used some rubberized nuts so we could tighten the joints just enough so that the mini-arm would stay in place if you let go of it, but it is still easy to move.

The controller works using a simple proportional feeback control loop. We have potentiometers on the robot arm and on the mini-arm. When there is a difference between the potentiometers of the two arms, the controller multiplies this difference by a gain and this value is sent to the speed controllers on the arm motors. (Almost any engineer on your team could explain this in more detail if you asked.)

We used this type of control since we are using a double jointed arm. If we used joysticks it would be next to impossible to control (if we could control it, it would be sloppy at best). The mini-arm allows for extremely easy and accurate control. In fact, we rely on fast and accurate control since we only hold one ball. Our philosophy is that if we could do it fast enough, we don't need to hold multiple balls (we've done a good job so far - we scored 21 pts. one match by ourselves (and won) when our partner couldn't move their robot). Shown below is a picture of the robot. I will post the free press picture shortly.

If you're going to Chicago, feel free to stop by our pit and have a close look.

- Chris






__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reflected Inertia? archiver 2001 9 24-06-2002 03:50


All times are GMT -5. The time now is 02:51.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi