|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#11
|
|||
|
|||
|
Re: V1.0 of the print had it wrong too!
Posted by Michael Betts at 1/15/2001 9:35 PM EST
Engineer on team #177, Bobcat Robotics, from South Windsor High School and International Fuel Cells. In Reply to: V1.0 of the print had it wrong too! Posted by Joe Johnson on 1/15/2001 8:44 PM EST: : By the way, has anyone else found a secret dimension : hidden on the print somewhere that tells where the "tow : bars" are with respect to the edge of either the goal : or the stretcher. Dr, J, From Update #3: “The outer bolt holes of the grab bar mounts (Part # KK70-7) are in-line with the outer bolt holes of the caster bases. These holes fall approximately 1” in from the adjacent edge of the goal base.” MIke |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Curie Division Robots information... (not complete) | archiver | 2001 | 3 | 24-06-2002 03:13 |
| Team 111 Picture | archiver | 2001 | 18 | 24-06-2002 00:50 |
| Wedge and Solenoids | archiver | 2001 | 3 | 24-06-2002 00:17 |
| bridge specs | archiver | 2001 | 2 | 23-06-2002 22:52 |
| Using Base 36 "Compression" For Easier Scouting and Other Interesting Tidbits | Adrian Wong | Rules/Strategy | 9 | 21-09-2001 20:28 |