|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: last years speed controllers.....
Posted by Al Skierkiewicz at 1/28/2001 10:07 AM EST
Other on team #111, Wildstang, from Wheeling High & Rolling Meadows High and Motorola. In Reply to: Re: last years speed controllers..... Posted by Al Skierkiewicz on 1/28/2001 10:01 AM EST: Additional... 2.1.2 Rotating Light A Relay Module must be used to power the rotating light provided in the kit. The light must turn on when the robot is enabled and turn off when the robot is disabled. The control system will provide this functionality automatically when a Relay Module is connected to relay output 8 on the Robot Controller and the default program is running. Wire the light such that the black power lead is connected to M- and the red power lead is connected to M+ on the Relay Module. I am still looking for modification reference but I believe as last year, the rotating light is on the "do not modify" list. Al |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| initialization program and speed controllers | rosebud | Programming | 15 | 05-10-2004 03:35 |
| speed controllers & circuit breakers | deuceswild | Electrical | 2 | 15-01-2003 14:46 |
| speed controllers | archiver | 2000 | 5 | 24-06-2002 00:19 |
| Capacitors on speed controllers | archiver | 1999 | 7 | 23-06-2002 22:09 |
| Calibrating speed controllers and joysticks | thedillybar | Technical Discussion | 4 | 11-02-2002 13:24 |