|
Re: circuit breakers....
Posted by Al Skierkiewicz at 2/1/2001 1:44 PM EST
Engineer on team #111, Wildstang, from Wheeling High & Rolling Meadows High and Motorola.
In Reply to: circuit breakers....
Posted by Anton Abaya on 2/1/2001 12:08 AM EST:
: when the circuit breakers trip...do i assume that the speed controllers wont get power either? (meaning it doesnt run or have any lights at all?)
If you have wired the circuit breakers in series with the speed controllers as required by electrical rules then the answer is yes, no power will be supplied to the controllers. However the normal trip mode is as Steve described.(See Steve's post) A total death (no lights at speed controller) may be due to a bad crimp, bad circuit breaker, shorted motor or bad speed controller. Check the first three before swapping out the speed controller.
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|